WEBVTT

00:00:00.000 --> 00:00:05.680
Let's hide faces and license plates with Auto Blur and fill the gaps.

00:00:05.730 --> 00:00:10.190
Go to 4 seconds. Face and License plate are both on.

00:00:10.240 --> 00:00:14.590
Turn off License plate, and the plate shows.

00:00:14.640 --> 00:00:18.750
Turn it back on, and the plate is hidden again.

00:00:18.800 --> 00:00:24.050
Clicking the detected plate switches it to Original on its own.

00:00:24.100 --> 00:00:30.030
It needs hiding, so set its target effect back to Blur.

00:00:30.080 --> 00:00:34.690
Go to 8.8 seconds and look at the pedestrian in front.

00:00:34.740 --> 00:00:39.850
Clicking her face lets you keep just this person as Original.

00:00:39.900 --> 00:00:46.500
Here, set it back to Blur.

00:00:46.550 --> 00:00:51.470
At 0 seconds, her face isn't hidden yet.

00:00:51.520 --> 00:00:54.930
Under Manual Blur, choose Rectangle.

00:00:54.980 --> 00:01:01.370
Draw a rectangle around her face, with some margin.

00:01:01.420 --> 00:01:05.670
Drag the right end of the purple bar to 1 second.

00:01:05.720 --> 00:01:12.890
Click Start tracking to follow her face from 0 to 1 second.

00:01:12.940 --> 00:01:18.550
Next, cover the plate that leaves the frame quickly after 4 seconds.

00:01:18.600 --> 00:01:30.400
Choose Rectangle again and cover the plate's path to the lower-right edge.

00:01:30.450 --> 00:01:39.560
Apply this area from 4.0 to 4.6 seconds only, without tracking.

00:01:39.610 --> 00:01:44.360
At 4.2 seconds, check that the plate is inside the area.

00:01:44.410 --> 00:01:49.090
At 4.44 seconds, the last visible part is covered, too.

00:01:49.140 --> 00:01:55.620
After 4.6 seconds, the area turns off and the plate is already out of frame.

00:01:55.670 --> 00:02:12.280
Play from the start and check that faces and plates stay hidden.

00:02:12.330 --> 00:02:17.510
When you're done, save the video with Export at the top right.