WEBVTT

prepare
00:00:00.300 --> 00:00:04.100
Turn Auto Blur off and open Manual Blur.

draw
00:00:04.100 --> 00:00:12.500
Choose Rectangle and draw around the entire plan.

effect
00:00:12.500 --> 00:00:18.000
Check that Blur is selected for the rectangle.

start-handle
00:00:18.000 --> 00:00:22.800
Drag the left edge of the purple range bar to 2 seconds.

end-handle
00:00:22.800 --> 00:00:27.000
Drag the right edge to 6 seconds.

range
00:00:27.000 --> 00:00:31.100
Confirm that the blur range is 2–6 seconds.

inside
00:00:31.100 --> 00:00:37.450
Go to 4 seconds and check that the plan is blurred.

before
00:00:37.450 --> 00:00:43.600
At 1 second, the plan appears unblurred.

after
00:00:43.600 --> 00:00:51.760
At 7 seconds, the plan is also unblurred.

approach-start
00:00:51.760 --> 00:01:01.000
Move just before the start boundary and check the effect.

before-boundary
00:01:01.000 --> 00:01:04.180
At 1.96 seconds, just before the start, the image is unblurred.

at-start
00:01:04.180 --> 00:01:09.200
At 2 seconds, the rectangle blur begins.

approach-end
00:01:09.200 --> 00:01:16.000
Now move the playhead to the end boundary.

at-end
00:01:16.000 --> 00:01:20.400
The blur remains applied at the 6-second endpoint.

after-boundary
00:01:20.400 --> 00:01:30.102
At the next frame, 6.04 seconds, the image is unblurred again.

full-playback
00:01:30.102 --> 00:01:38.600
Play all 8 seconds from the beginning to check the effect’s time range.

finish
00:01:38.600 --> 00:01:43.000
Finish the review by checking the range, its boundaries, and the full
playback.